31 January, 2016

Tutorial - Make Your Own Iron-On Fabric Labels

I wanted to share with you how I make my own iron-on fabric labels.  These labels are probably not suitable for items that need laundering, (SEE UDATE BELOW) but they work great for that professional finishing touch for my thread catchers.

I use June Tailor Colorfast White Printer Fabric, shown here.  I purchase the 10 pack and ALWAYS use my 50% off coupon at JoAnn's.  This package yields 360 labels!

The next step is to print the labels.  I created a document in Word with four columns.  I lined up my little Curry Bungalow logo in the four columns, evenly spaced.  I put the fabric paper through my printer and this is what my label sheet looks like.  Always press thoroughly with a dry iron after printing to set the ink.  These labels can handle some moisture. I actually saturated a label and the ink did not bleed, but I have not attempted to launder anything with a label on it.

Now, it took some trial and error to figure out how to best attach my labels to the back of a thread catcher.  Once the stabilizing paper is removed from the fabric, you just have, well...  just fabric.  I needed something to make my labels into iron-on labels.  I hit upon the idea of using HeatNBond Ultrahold on the back. You can purchase it in small packages, a five yard roll or as yard goods on a bolt.

I press my printed fabric page onto a piece of HeatNBond cut to the same size as my page.  At this point, I thought that I had the whole iron on label thing covered, but my finished labels were a bit see through with the fabric print on my thread catchers showing through the label.  I wanted something less transparent. After removing the paper backing from the HeatNBond, I pressed it to a sheet of white printer paper.  So again, I have a great label, it has a nice crisp feel to it, the fabric does not show through, but it has a paper backing.  It's back to the HeatNBond for one last layer pressed onto the back of the paper.

One more time, in a nutshell. I have the printed fabric paper as the first layer.  Remove it's paper backing and press onto a sheet of HeatNBond.  Remove the paper backing from the HeatNBond and press to a sheet of white printer paper.  Press the printer paper to another sheet of HeatNBond and your label sheet is complete.

The next step is to cut the labels.  I draw lines between the columns with a heat sensitive Frixion pen. 

Then cut the labels into horizontal strips using the rotary cutter.

I like to use my 3mm scalloped pinking shears to get the cute little scalloped edge for my labels. Yes, I could just cut them straight with regular scissors, but these look so much CUTER! Lightly press with the iron if any of the Frixion marks remain after cutting.  

Press these fabric labels onto your product and when I say press... I mean PRESS!  Do not move the iron back and forth.  If you do, the layers of the label may separate with the heat being applied.  Give it a really good pressing, then let the label cool. 

I hope that you have enjoyed this little tutorial.  Again, these labels will not work for everyone or for every product, but they are the perfect branding solution for Curry Bungalow!

UPDATE - Since posting this tutorial, I have done some experimentation to see if my labels are indeed colorfast.  I laundered a label and was pleased to see that there was absolutely no fading of the printer ink. None at all!  But... and there is always a "but", isn't there?  The paper backing that I ironed on to make the label more opaque did not fare so well.  This issue would be easily corrected by adding another layer of the fabric printer sheets rather than the card stock.  

And because I can never just leave anything alone... I have begun stitching around my labels before I iron them onto my product to give the appearance that they are actually sewn on.  That's just another little touch to make a better and more professional looking finished product.  


7 comments:

  1. Sounds like a really labor of Love ;-)

    ReplyDelete
  2. How do they wash with the project? Does the paper inclusive hold up well?

    ReplyDelete
  3. Adrienne, I mentioned in the next to the last paragraph that if your tagged item is to be laundered, you might want to add a second layer of fabric rather than the paper that I used. But when the label is sewn down through all layers, the paper might hold up just fine. I have not personally tested it, and would advise anyone wanting a completely washable label to do their own test.

    ReplyDelete
  4. Hi there! I just now how found your sweet etsy shop and blog and am enjoying reading it. I love your branding and labels. I'm wondering where you found scalloped picking shears. I've looked at ones on Amazon but most of the feedback hasn't been great. Do you have vintage ones? Thanks for any information you can share with me.

    ReplyDelete
  5. Thank you for the kind words, Staci. I bought my scalloped shears a few years ago and if I remember correctly, I found them on eBay. They were from China... and I do my best to try to find items made in the US but I was not able to. Mine are 3mm, I think. I also have the 5mm which works nicely for larger items. I have not had any problems with mine and they work well on the many layers of my labels.

    ReplyDelete
  6. I wanted to thank you for this excellent read!! I definitely loved every little bit of it. I have you bookmarked your site to check out the new stuff you post. cơ khí thành tuyết

    ReplyDelete
  7. I really loved reading your blog. It was very well authored and easy to understand. Unlike other blogs I have read which are really not that good.Thanks alot! leather labels uk

    ReplyDelete